Hardware Installation Instructions
Key Explanation:
| Identifier | Use Description |
|---|---|
| DC 12V | Power port, used to connect the power cord |
| USB | USB interface, can connect the keyboard for device debugging |
| CONSOLE | Console port, can connect console cable for device debugging |
| No.0 Network Port | WAN0, optical and electrical port are in the same port, used to connect the router to ensure network for the smart gateway |
| No.1 Network Port | WAN1, optical and electrical port are in the same port, used to connect the router to ensure network for the smart gateway |
| No.2 Network Port | LAN0, used to connect to the client (computer, switch), and connects the clients to the smart gateway |
| No.3 Network Port | LAN1, used to connect to the client (computer, switch), and connects the clients to the smart gateway |
| No.4 Network Port | LAN2, used to connect to the client (computer, switch), and connects the clients to the smart gateway |
| No.5 Network Port | LAN3, used to connect to the client (computer, switch), and connects the clients to the smart gateway |
| Antenna Post | Used to install Wi-Fi antenna (If the hardware is without Wi-Fi version, there is no need for installation) |
- Check that the parts are complete. For part details, please see Hardware Parameters.
- Connect the WAN port (this article takes the No.0 network port as an example) to the router, LAN to the client, and then turn on the power.
- If the hardware is UCPE3601, you need to install an antenna.